Uncategorized

The Faculty of Electrical Engineering (FKE) together with Center for Robotics and Industrial Automation(CeRIA), Universiti Teknikal Malaysia Melaka(UTeM) are pleased to invite all postgraduates students and researchers from UTeM and all other higher learning institutions in Malaysia to submit two pages extended abstract to The Symposium on Electrical, Mechatronics and Applied Science(SEMA2018). The Symposium will be held on 8 November 2018 at Universiti Teknikal Malaysia Melaka (UTeM), Melaka.

•Authors are invited to submit an extended abstract (2 pages) according to posted format provided at http://sema.utem.edu.my.
•For the paper submission authors required to have the CMT account.
•All papers should be submitted electronically via CMT.

More info:

http://sema.utem.edu.my

IRID’18 is an one day research event hosted by the Advanced Manufacturing Centre (AMC), UTeM.

irid.utem.edu.my

IRID aims to offer a unique platform for researchers, engineers and post-graduate students from industry, especially in the field of engineering and technology to present their research findings, establish a mutual knowledge transfer and networking.
Through this platform, solutions to the problems and needs of the local industry can be shared, thus bridging the gap between university and industry in Malaysia.

Submission:

For Research Showcase, prospective authors are kindly invited to submit their 2-pages extended abstract. All submitted extended abstracts will be peer reviewed and evaluated based on originality, research content, correctness, relevance to the topics, and readability.

Please find the details and flow of Submission and Registration in below.

Flow of Submission

Online Registration Form: IRID Online Registration

GUIDELINES FOR EXTENDED ABSTRACT

The extended abstract should be written in English (including figures, tables and references).
The extended abstract should be 2 pages length.
The extended abstract should be prepared in Microsoft Word format by using the template given below.
Template & Instruction for 2 Pages Extended Abstract
The extended abstract must be submitted online via EASYCHAIR by 1st April 2018.
Please name the file according to your paper title.
All submitted extended abstract will be peer reviewed and evaluated based on the following criteria:

Originality
Content
Correctness
Relevance to the topic
Readability

More info:
http://irid.utem.edu.my/

CALL FOR PAPERS

We are pleased to announce that the 5th IET International Conference on Clean Energy and Technology (CEAT 2018) will be organized in Kuala Lumpur, Malaysia on 5 – 6 September 2018. The CEAT 2018 is jointly organized with the 4th International Conference on Global Sustainability & Chemical Engineering (ICGSCE 2018).

The CEAT-ICGSCE 2018 aims to provide a premier academic platform for researchers from all around the world to present their latest research findings, ideas, developments and applications in the domain of interest. It also provides a unique interdisciplinary forum that can create potential collaboration and networking among the academics, engineers and researchers leading to a development of new technology and solutions for a greener future.

Prospective authors are invited to submit full papers according to the scope of the conference and guidelines provided on the conference website: http://www.ceat-icgsce.com.

Please check the conference website regularly for the latest updates.

List of available competition:

I-ENVEX – http://envex.unimap.edu.my/
Innovate (Innovate Malaysia Design Competition) – http://innovate.dreamcatcher.asia/

Who can join? Open to undergraduate students, team of 3 students.

Design Challenge: Renewable Energy

Unlike fossil fuels, which are finite, renewable energy sources regenerate. Renewable energy is energy that tapped from the continually replenished sources, typically solar, biomass, wind, tidal, and hydro. The potential of large hydropower in Sarawak is largely known with several studies undertaken by government bodies, consulting firms, and utility companies. However, the potential of small renewable sources comprising of solar, biomass, wind, tidal, and small hydro is largely unknown and hence, these resources are largely untapped.

Recognizing the importance of utilizing these small renewable energy sources, the Energy Design Challenge welcomes studies to determine the theoretical and economic potential of these small renewable sources, and mapping of these resources to explore and identify their potential applications for fully utilization in urban and rural development.

Interested?

Do email me at mariam@utem.edu.my to discuss further research details and for further information. Share this email with your friends who might be interested.

Currently searching candidates for Final Year Project (FYP), 2016/2017 for BEKM & BEKC program.

Research Area:

There are 2 categories of projects:
1. Continuing project from FYP senior (the hardware are available, student may need to upgrade it a bit & design the system)
2. New project (simulation; and/ or experimental setup – new hardware need to be set -up)

List of fyp project title: Open for discussion.

Students Criteria:
1. CGPA = preferbally above 2.75
2. Good working ethics
3. Students who strives for knowledge & willing to work hard.
4. Self-disipline student

What do you gain?

• Full supervision by supervisor– to ensure candidates graduate with an ‘A’ grade.
• Prepare students for working environment/ postgraduate studies.
• Invaluable experience in research & life-long learning
• Team-work & good research environment at Motion Control Research Lab (MCon Lab) with support from peers & seniors students (fb page: https://www.facebook.com/mconutem )

Open to all who:

Interested?

Do email me at mariam@utem.edu.my to discuss FYP topic and for further information. Share this email with your friends who might be interested. You may also drop by my website for the list research topics at http://mariamghazaly.com/ . First come first serve basis.

Key Dates:
March 31, 2016: Deadline for short abstract submissions and scholarship applications.

The 31st American Society for Precision Engineering Annual Meeting will feature tutorials, technical paper presentations, poster sessions, a student competition and mentoring session, commercial exhibits and technical tours. Portland promises many opportunities for learning, networking, and recruiting. In addition, a technical exhibit puts you face to face with experts for commercial suppliers whose equipment enables precision engineering. Portland is in the heart of the high-tech “Silicon Forest” that has a deep appreciation for precision technology. The Marriott Downtown is situated on the Columbia River with a scenic walkway and easy access to downtown restaurants, coffee shops and pubs.

Papers are being solicited in the following areas:
## Controls and Mechatronics
## Metrology Systems
## Precision Design
## Precision Manufacturing
## Micro and Nano Technologies
## Surface Characterization and Applications of Measurement Science

Crossing cutting applications of precision engineering that draw from multiple categories are welcome.

Website: http://http://aspe.net/technical-meetings/31st-annual-meeting/call-for-papers

Currently searching candidates for Final Year Project (FYP), 2015/2016 for BEKM & BEKC program.

Research Area:

There are 2 categories of projects:
1. Continuing project from FYP senior (the hardware are available, student may need to upgrade it a bit & design the system)
2. New project (simulation & experimental setup – new hardware need to be fabricated)

List of fyp project title:
1. Robot following robot (continuing from senior project)
2. Mobile robot face recognition system (continuing from senior project)
3. Controller design of two upper limb robotic arms (continuing from senior project)
4. Linear motion electrostatic actuator (continuing from senior project)
5. Robotic fingers controller for PTP positioning (continuing from senior project)
6. Gate system controller (new project)
7. Smart library system (new project)

Students Criteria:
1. CGPA = preferbally above 2.75
2. Good working ethics
3. Students who strives for knowledge & willing to work hard.
4. Self-disipline student

What do you gain?

• Full supervision by supervisor– to ensure candidates graduate with an ‘A’ grade.
• Prepare students for working environment/ postgraduate studies.
• Invaluable experience in research & life-long learning
• Team-work & good research environment at Motion Control Research Lab (MCon Lab) with support from peers & seniors students (fb page: https://www.facebook.com/mconutem )

Open to all who:

Interested?

Do email me at mariam@utem.edu.my to discuss FYP topic and for further information. Share this email with your friends who might be interested. You may also drop by my website for the list research topics at http://mariamghazaly.com/ . First come first serve basis.